November 29, 2018

6 Easy Steps to Shaping Your Christmas Tree

Posted by Treetopia in Treetopia Guides

[VIDEO] 6 Easy Steps to Shaping Your Christmas Tree

However small your artificial tree, proper fluffing will make it look full and gorgeous! Fluff your way to success with this guide on how to shape a Christmas tree.

Step 1: Prepare Your Tools

Treetopia Basics - True Blue Tree

Probably the cutest way to use a step ladder! Image and décor courtesy of Décor Adventures.

#1 Use a Ladder
This or a step stool helps you reach the higher areas of your tree without difficulty.

#2 Study the Instruction Manual
Most trees come with a set of instructions. Keep it on hand in case you run into any snags.

#3 Wear Cotton Gloves
This isn’t absolutely necessary, but we recommend wearing a pair. Shaping your tree can be rough on your hands. Gloves protect them from prickly tree needles.

Treetopia tip: By the way, if you’re working with a pre-lit tree, plug in the lights to check if all the bulbs work.

#4 Find a Photo Reference
Research for photos of trees that have the shape you want. As you shape, compare your tree with the image. Use a photo of a live tree for a more natural look.

Step 2: Start From the Bottom

Addison Spruce Christmas Tree

Start by securing the bottom section of the tree to the stand and check that every hinged branch falls into place. Then, spread each branch tip out and away from the main branch.

Step 3: Fluff from the Inside Moving Out

Fluffed Orange Christmas tree branch

Photo courtesy of A Kailo Chic Life.

Begin with the tips nearest to the center pole. Fully fanned inner tips help cover gaps and prevent light from passing through. Then, check to see that the tree trunk isn’t exposed.

Once the inner tips are fluffed, move on to the outer needles. Check your photo reference for what direction they should point. For the upswept look, check out our Balsam Spruce Rotating Christmas Tree, or our Frozen Fir Flocked tree for a downwards-facing effect. Whichever it is, you call the shaping shots!

Treetopia Tip: Arrange your branches by alternating them in opposite vertical and horizontal directions. These don’t have to be perfectly aligned for a more natural look. Here are more fluffing tips from our brand ambassador Kara Whitten.

Step 4: Shape by Section

White Christmas Tree

Make sure that get most of your shaping done in one section before moving to the next. Repeat from step 3 until you’re ready to shape the top of your tree.

Step 5: Shape the Topmost Area

For the last section, position the topmost branches straight up to form a smooth slope. This enhances the triangular shape of your tree.

If you’re using a tree topper, keep it in mind as you shape the branches. In fact, go ahead and position your tree topper to see the actual effect.

Treetopia tip: If you’re looking for some inspiration, check out these fantastic tree topper ideas!

Step 6: Give it a Once Over

Tinkerbell Silver Christmas Tree

Take a step back and survey your work. Make a few extra fluffs here and there until you’re satisfied. Then give yourself a well-deserved pat on the back!

The last thing you need to do is jazz up your tree with a decorating theme that’s all you. All that effort will give you a beautifully shaped Christmas tree this year and, with proper storage, many more to come.

Treetopia Tip: If you’re looking for gorgeous tree decorating ideas, we’ve got lots more in store!

Do you know anyone who needs help with shaping his or her tree? Share these tips with your friends on social media. You might want to pop on over to their place to lend them a helping hand, too. Now that’s what we call Christmas spirit!

Facebooktwittergoogle_plusredditpinterestlinkedinmailby feather

You can follow any responses to this entry through the RSS 2.0 You can leave a response, or trackback.